7
CD PLAYER OPERATION
1.
Set the
FUNCTION/BAND
selector to CD position.
2.
To open the CD compartment, lift the CD door on the edge (marked LIFT TO OPEN).
3.
Place a compact disc on the spindle with label side facing upward.
4.
To close the CD compartment, push the door down.
- The CD player scans the contents of the CD and the total number of tracks is displayed
for about 3 sec.
5.
Press the
PLAY/PAUSE
button to start playback from track 1 and the display will indicate
the playback track number.
6.
Adjust the sound using the
VOLUME
control.
7.
To interrupt playback, press PLAY/PAUSE button.
Press the
PLAY/PAUSE
button again to continue playback.
8.
Press
STOP
button to stop playback.
9.
To switch off the CD, press the
POWER
button once.
Note: CD playback will also stop when:
- The CD has reached the end.
- The CD door is open.
- The
FUNCTION/BAND
selector is set to AM / FM / FM ST. position.
SKIP/SEARCH or
Selecting a different track during playback
-
You can jump to the next track by pressing
once. If you want to skip more than one track,
press
more than once until the display shows the desired track number.
-
If you want to repeat the tuning track from the beginning, press
once. If you want to
repeat one of the previous tracks, press
more than once until the display shows the
required track number.
Starting with a particular track
1.
In the STOP position you can select a desired track using the
or
button.
2.
Press
PLAY/PAUSE
to start playback.
Searching for a passage within a track
You can search for a passage within a track. The CD is played at low volume and at high
speed, however, the sound is still recognizable.
1
Keep the
or
button pressed during playback, and release the button as soon as you
recognize the required passage:
- Normal CD playback will resume from this point.
SMB634 Eng
2032.1.10, 8:10 PM
7
