10/2021 V 1.1
VIEW 11
4mm
04/23
Remove and replace the Panel adding
or subtrac�ng spacers as necessary to
level the Panel (to a maximum height
of 5mm inside the Underframe).
Check the Panel is level using a Spirit
Level.
Check the Return Panel has a 4mm gap
between the Panel and the front face
of the Front Underframe.
Ensure there is adequate glass in both
the Wall Profiles. (6mm is
recommended)
If the Wall Profile are flush with the
Return Panel, move on to step 18.
If the Wall Profile is not flush with the
top of the Return Panel, mark the Wall
Profile. Using a straight edge, mark
where the wall channel needs to be
trimmed.
To protect the channel finish, it is
recommended to mark on masking
tape.
6mm min
Wall Profile
Glass Panel
13
14
15
16
