9
1
. Adjust ladder to required height (refer
to adjusting the height of the ladder
for use in the A-frame position).
2
. Adjust the ladder legs to fit the
staircase. Open the ladder by pulling
the two ladder halves apart until both
hinge lock pins snap into place.
(See Figure E-1)
3. Unlock the Lock Assemblies on the upper half of the ladder.
Hold the outer ladder then walk backwards allowing the ladder
to extend to the required height. Extend the lower half of the
ladder if more height is required. (See Figure D-1)
Figure D-1
4. To stow the ladder from its extension position, reverse the above
procedure, starting with the ladder base.
5. NOTE: Always hold the inner ladder securely when unlocking
the lock assemblies and adjusting the ladder height.
DO NOT USE THE OUTER OR INNER SECTIONS OF THE
LADDER AS A SEPARATE STEPLADDER.
DO NOT USE THE INNER SECTION WHEN SEPARATED
FROM THE OUTER SECTIONS IN THE EXTENSION
LADDER POSITION.
Figure E-1
Figure E-2
E. Using the Step Level Positions
Once the hinge lock pins snap into
place, insert the work platform as a
spreader to brace the ladder.
(See Figure E-2)
Refer to page 15 for more information
on how to insert the Work Platform.
(120KG MODEL ONLY)
3. IMPORTANT
Insert Work
Platform
