Trench
Fittings Instructions
The Radiator Company
Units 13 - 14 Charlwoods Road
East Grinstead
West Sussex
RH19 2HU
Please read these instructions and the terms and
conditions carefully prior to installation.
Failure to do so may invalidate the warranty.
Mate
rials
Aluminium and Steel Convector,
Poly Ethyleen or
Fibreglass
Trench Unit, Wood or Aluminium Grille
Connections
flow and return.
Test pressure
12 Bar
Testing authority
EN442
Maximum operating pressure
10 Bar
Maximum working temperature
As to EN442 ∆t 130ºC
Packaging
Protective cardboard wrapping with shrink wrap polystyrene
1
2
”
All products must be inspected once removed from the packaging and The Radiator Company
notified within 28 days of delivery of any scratches, blemishes or other damage.
The Radiator Company will then replace the radiator.
Imperfect radiators should therefore not be fitted and The Radiator Company will not accept
responsibility for replacement of scratched or damaged radiators once they have been fitted. This
includes any consequential loss or cost of fitting.
If The Radiator Company are not notified within 28 days of the date on the signed delivery note
then it will be deemed that The Radiator Company have fully complied with its obligations and
claims will not be considered.
Failure to comply with any of the above may invalidate any claims.
We recommend that after you check the product on delivery that it is stored in its packaging to
prevent damage prior to installation. The Radiator Company cannot accept responsibility for items
damaged after delivery.
Terms & Conditions
Guarantees & Liabilities
As we are not the manufacturers of this product we will take all reasonable endeavours to make
over to you the benefit of any warranty or guarantee given by the manufacturer, which is usually five
years on most of our range. (Copies of specific guarantees for any of our products are available on
request).
The guarantees in all cases are subject to the products being installed in accordance with British
and or European standards as well as these fitting instructions. The guarantees in all cases are
restricted to the free of charge replacement or repair of the failed product only. Our liability will
under no circumstances extend beyond the repair or replacement of the product supplied by us.
Claims for either labour in replacement or damage to property are not admissible. Any goods that
are returned, in the event of a problem, will belong to The Radiator Company.
Technical Specifications
If you have any questions please contact us on 01342 302250
www.theradiatorcompany.co.uk
If you have any questions please contact us on 01342 302250
www.theradiatorcompany.co.uk
5
Ye
ar
Guarante
e
Ye
ar G
uar
an
te
e
Please Note: In accordance with Part L1 2006 of the Building Regulations and BS7593:1992 code of
practice for the treatment of hot water and central heating systems, we strongly recommend flushing
the heating system post installation of new radiators and then adding the correct quantity and type of
inhibitor for use with your radiator and system to prevent corrosion. Damage caused to systems not
protected by a suitable inhibitor will not be covered by manufacturer’s guarantee.
THE
RADIATOR
COMPANY
TREN1.2
PLEASE NOTE: Systems using micro bore
pipework must have adequate pressure and flow
rates for the number and style of radiators on the
system.
