THE-ONE TRD1, Instruction Manual

Page: 5 / 12

Install the battery
Power Supply
This section contains information on how to use the product and
how to prepare for performance. Please read this section carefully
before starting to use it.
This product is equipped with lithium battery, which must be
installed in the battery compartment before use.
In addition to battery power supply, you can also use the power
adapter to supply power directly, or use the power adapter to
charge the lithium battery.
1. Connect the USB end of the
power cable to the 5V DC plug;
2. Connect the 5V DC plug to
the 220V power socket;
3. Connect the Type-C end of
the power cable to the power
socket of the Module.
1. Open the back cover of the
battery compartment;
2. Install the battery according to
the positive and negative poles;
3. Close the back cover of the
battery compartment.
Functions
Note: When the battery is fully charged, it can
be used continuously for 2-3 hours depending
on the state of use.