D I S M A N T L I N G
Lift the cushions from the Velcro backing
and place your hand in seating cavity.
There you will find three bolts joining one
pod to another.
Peel back acoustic foam at the top of your
pod and place your hand in the hole and
undo the top side fixing (see diagram).
BACK PANEL WITH ACCOUSTIC SIDE
1.
The acoustic foam sides are fixed using glass adapters into the pod’s back panel. To undo the
adapters, carefully peel back the acoustic foam from the backing.
2.
Once you have found locating holes place your hand into the cavity to undo nuts. You will need to
undo five bolts in total then release the back-panel wings by pulling away from the pod. Repeat
this process on the opposite wing.
The approximate weight is 18kg’s and we advise that two members of staff operate.
1.
Turn off the power at the main switch.
2.
Remove the plug from the power end and remove kettle plug from bottom right-hand side of the
back panel. Now you are ready.
3.
Central carbon core is fixed at the top of pods. Reach through and undo two bolts to release the
carbon core.
Approximate weight is 40kg’s and we advise two members of staff to operate.
REMOVING THE SEATING
