WARNINGS
Always use the jack provided as
original equipment with your vehicle.
If using a jack other than the one provided,
make sure the jack capacity is adequate for
the vehicle weight, including any vehicle
cargo or modifications. If you are unsure if
the jack capacity is adequate, contact the
authorized dealer.
Switch off the running boards before
jacking or placing any object under
your vehicle. Never place your hand between
the extended running board and your
vehicle. A moving running board may cause
injury.
Only use the spare wheel carrier to
stow the wheel provided with your
vehicle. Other wheel sizes could cause the
spare wheel carrier to fail if it does not fit
securely or is too heavy.
Note: Passengers should not remain in the
vehicle when the vehicle is being jacked.
Park on a level surface, activate the hazard
flashers and set the parking brake. Then,
place the transmission in park (P) and turn
the engine off.
Removing the Jack and Tools
Note: Pay close attention to the orientation
of the jack and tool kit bag, because it will
have to be reinstalled after changing the tire.
1. Open the liftgate, then locate the access
panel on the floor behind the third row
seat. Unlatch and remove the panel.
E252435
2. Remove the wing nut by turning it
counterclockwise.
3. Remove the jack and tool kit bag from
the bracket.
4. Loosen the straps and remove the tool
kit bag from the jack.
Removing the Spare Tire
1. Remove the swivel wrench from the tool
kit bag.
2. Open the spare tire winch access plug
at the bottom of the compartment for the
jack and tools tray.
3. Insert the swivel wrench through the
access hole in the floor and engage the
winch.
E252487
417
Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201708, First Printing
Wheels and Tires
Summary of Contents for NAVIGATOR 2018
Page 3: ......
