MAKING ELECTRICAL CONNECTIONS
Connecting Power
There are four options for Power input into the batten.
19 Pin Male Circular Connector (Socapex)
– This connector comes pre-wired ready to connect to a
female connector
SO Cable
– The number of circuits determines the number of conductors, either 12/3, 12/4, or 12/5.
The length of cable extending beyond the batten is fixed at the factory according to approved
drawings. A connector is not supplied, so choose a connector that will meet code requirements in your
area.
Terminal Box
– The batten will have a terminal with a terminal strip for connection of wires.
Extended Internal Conductors
– The end of the batten has a ¾” NPT threaded socket for electrical
fittings. The conductors will need to be enclosed in conduit provided by others. Each power circuit
will have a hot and neutral conductor (up to six circuits), and there will be one ground that is shared by
all circuits. Connection to building power should be done by a licensed electrician. See the color code
chart for circuit conductor colors.
SO Cable
Extended Internal conductors
Terminal Box
ELECTRICAL CONNECTIONS MAY ONLY BE MADE BY INDIVIDUALS
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THIS
PRODUCT AND THE HAZARDS INVOLVED.
19 Pin Connector
Maintenance
The M
EGA
B
ATTEN
requires very little maintenance once installed. The M
EGA
B
ATTEN
has a powder coat
finish so it can be wiped down with a damp cloth to remove accumulated dust. In the event of a damaged
outlet, turn off power to the M
EGA
B
ATTEN
. A replacement can be ordered and repaired on site by a
qualified individual.
