2
Insert 2
cam screws
into
left and right side
panels
as shown. Secure, but do not over
tighten cam screws with a
flat head screw-
driver.
3
Fit dowels of
top and bottom crossbars
into
corresponding holes of
left side panel
as
shown. With a
phillips head screwdriver
, turn
each cam clockwise until it securely engages
each cam screw.
4
Slide
back panel
into corresponding grooves of
assembled unit as shown.
5
Fit dowels of
shelf
into corresponding holes of
assembled unit shown. Secure with 2
bolts
, 2
spring washers
and 2
flat washers
using a
screwdriver. Do not over tighten the bolts.
Made in Vietnam - r06
Page 2 of 4
Customer Service
800.933.9904
| Latest instructions available at
www.landofnod.com
right side
panel
left side
panel
left side
panel
bottom
crossbar
top
crossbar
back
panel
shelf
NOTE: Do not over
tighten the bolts
NOTE: Do not
over tighten the
cam screws
SIMPLE
DESK HUTCH
