3
4
Slide
toddler rail panel
over
support bracket
, being sure to fit dowels of
toddler rail panel
into corresponding holes of
each
end panel
. Secure
toddler rail panel
to
support bracket
with 1
small bolt
as shown. Attach bottom of
toddler rail
panels
to
end panels
with 2
small connecting bolts
, 2
lock washers
and 2
brackets
. At this point, fully tighen all fasteners
in toddler bed.
Carefully positon toddler bed assembly upright as shown. Using an
Allen wrench
, set
mattress support panel
to
lowest setting for conversion to toddler bed. Only loosely secure using 4
large bolts
. Attach the
support bracket
on
the left
end panel
to the position as illustrated, and fully tighten
small bolt
to secure. Remove the
small bolt
and
support bracket
from the right
end panel
and set aside for storage.
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Panorama Toddler Rail
Assembly Instructions
Page 3 of 4
Made in China - r11
NOTE: Check to make
sure bottom panel sits
above the cleat of the
toddler rail panel
