8
7
3 Tiers Wall Desk
Assembly Instructions
The Land of Nod
8135 River Drive
•
Morton Grove, IL 60053
•
p: (800) 933-9904
•
•
www.landofnod.com
Page 6 of 8
WALL
Determine location for wall mounting. With assistance of another adult, mark the hole locations of the unit on the wall using
the included
wall mount template
. Remove the wall template and drill 6 pilot holes in the wall slightly smaller in diameter than
the wall anchor. Gently fasten each
wall anchor
into the holes as shown until they are flush to the wall.
For safe mounting, it is essential to use a wall anchor
appropriate to your wall type (i.e. plaster, drywall, concrete,
etc.). Mount to wood studs whenever possible.
The following
instructions are for drywall mounting only.
If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or
your local hardware store.
Insert 1
screw
into the 4 highlighted anchors and fasten with
phillips head screwdriver
, leaving approximately 1/4” of each
screw head protruding from the anchor.
Made in Taiwan - r05
