manualshive.com logo in svg

The Handy THSSALT, Operator'S Manual And Parts List

Share
Download
The Handy THSSALT Operator'S Manual And Parts List Download Page 3

 

- 3 - 

 

Table of Contents 

 

Warning Symbols ..................................................................................................4 

Controls and Features...........................................................................................5 

Component & Hardware....................................................................................6, 7 

Assembly Instructions ................................................................................. 8, 9, 10 

Operation Instructions ................................................................................... 11, 12 

Spreading Instructions...................................................................................13, 14 

Maintenance and Storage ...................................................................................15 

Specifications ......................................................................................................15 

Parts Drawing & Parts List.............................................................................16, 17 

Guarantee ...........................................................................................................18 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 

Summary of Contents for THSSALT





















Reviews:

No comments

Brands by name

Popular brands

Load more brands