CONNECTING PIVOTING LOG CARRIAGE AND BASE FRAME
Lay the pivoting log carriage on the ground
with legs inside the base frame, and put one
end of the cross brace outside (Fig. E).
Fasten them together with M8×40 bolts,
washers and lock nuts on both sides.
Fix the other end of the cross brace from the
inner side of the base frame with M8×70
bolts, washers and lock nuts on both sides.
INNER SAW BLADE COVER
Slide the shaft through the centre hole of the
inner saw blade cover and align its other
holes with those on the motor plate (Fig. F).
Secure it with three M8×20 bolts, washers
and lock nuts on the upper side and one
M8×45 bolt, washer and lock nut on the
lower.
M8x40 (x2)
M8x70 (x2)
FLAT WASHER
(x3)
M8x20 (x3)
M8x45 (x1)
Summary of Contents for THSBENCH-G
Page 20: ...PARTS DIAGRAM THSBENCH G 1938188001 ...
Page 27: ......
