background image

 

 

SPECIFICATION

  

The manufacturer reserves the right to change the product specification and livery according to 
continued product improvements. 

 

Model

 

THPLS

 

Product Number 

193847002 

Hopper Dimensions (mm) 

600 x 560 x 650 

Product Dimensions (mm) 

1240 x 830 x 770 

Wheel Size (mm) 

254 

Hopper Capacity (Litre) 

200 

 

WARNING

 

Read this instruction manual carefully before operating this machine. Make sure that you are familiar 
with the controls and properly operate the machine. Following these instructions to reduce the risk 
of fire, electric shock or personal injury.

 

 

IMPORTANT INFORMATION 

INTENDED USE 

The product is intended for domestic use only. This product is 

not

 intended for commercial use. 

Generally acknowledged accident prevention regulations and enclosed safety instructions must be 
observed. Only perform work described in these instructions for use, any other use is incorrect. The 
manufacturer will not assume responsibility for damage resulting from such use. 

 
DESIGNED FOR DOMESTIC USE ONLY. 

The Push Lawn Sweeper is designed for use in private gardens, but not in public facilities, parks or 
sports grounds and not for agricultural or forestry use. The product is designed to collect grass, 
twigs, leaves and other light garden material. This is not a commercial product. 
Compliance with this manual supplied by the manufacturer is a prerequisite for the proper usage of 
the machine. The operating manual contains servicing and maintenance instructions as well as 
directions for use. 

 
TRAINING 

Read the instructions carefully: Be familiar with the controls and the proper use of the equipment. 
Never allow children or people unfamiliar with these instructions to use the product. Local 
regulations can restrict the age of the operator. 
Never operate while people, especially children, or pets are nearby. 
Keep in mind that the operator or user is responsible for accidents or hazards involving the machine 
that occur to other people or their property. 
 

 

 
 
 
 

Summary of Contents for THPLS

























Reviews: