BRUSH CUTTER
The Brush cutter Attachment, will require you to attach the 3 Toothed Blade & Metal Safety Guard. If
after assembly, you experience vibration through the machine during use, assembly has been
incorrectly completed by the user.
Remove the Blade Nut, this has a left hand thread, so turn clockwise to remove (Fig 1)
Remove the Cupped Washer, Clamp Washer & Flanged Washer (Fig 2)
Remove the three Metal Guard screws with the supplied Allen Key (Fig 3)
Position the Metal Safety Guard over the head of the shaft, aligning the holes and insert the
Metal Guard screws, until securely tightened. (Fig 4)
Fit the Flanged Washer securely. (Fig 5)
Fit the 3 Toothed Blade, over the raised section of the Flanged Washer. (Fig 6)
Fit the Clamp Washer, ensuring the blade is flat against the Flanged Washer. (Fig 7)
Fit the Cupped Washer (Fig 8)
Fit the Blade Nut, this Nut has a left hand thread & therefore to tighten, rotate clockwise. (Fig 9)
Align the locking hole within the Metal Guard and Flanged Washer. Insert the Allen Key to stop
the shaft rotating and firmly tighten the Blade Nut with the Spanner supplied. (Fig 10a & b)
