Remove the supporting foot (part 22) on your log splitter THLS-B as shown in
Fig 4. (Please keep these parts safe for future use). Remove the nut and bolt
(4 and 4.1 Fig 2) from the main upright support leg A. Carefully lower the log
splitter into place on the stand as shown in Fig 5. Refit the nut and bolt (4 and
4.1) at the top of upright A.
**
Using the two screws (7 Fig 2) from the
underside, screw them through part D into the motor support feet to secure
the log splitter into place.
**
Note: Please check that the holes in the two feet under the electric motor
are clean and remove any debris or dirt before fitting.
Check that all fittings and fixing points are secure before starting work.
Fig 4.
Fig 5.
