The Handy THLS-C, Operator'S Manual And Parts List

Page: 5 / 13

Page 5
SPECIFICATIONS AND ELECTRICAL REQUIREMENTS
Model No THLS-C
Measurements Length 96cm
Width 27cm
Height 47cm
Weight 43kgs
*Log Capacity Diameter 5-25cm
Max Length 37cm
Splitting Force 5 ton
Ram Diameter 30mm
Motor 230v, 50Hz, 1500W
Hydraulic Pressure 24Mpa
Hydraulic Oil Capacity 2.9L
* Note: the diameter of the log is not the only factor that determines how difficult it is to split .
A small log may be difficult to split if it has knots or is a particularly hard wood.
Connect the mains lead to a standard 230V±10% (50Hz ±1Hz) electrical supply which has
under-voltage, over-voltage and over-current protection devices as well as a residual
current device (RCD) with a maximum residual current rated at 0.03A.
LIST OF MAJOR COMPONENTS
Check these components according to the following list and Figure 1 below:
A. Log Guiding Plates
B. Log Pusher
C. Operating Handle Assembly
D. Wheel and Frame
E. Oil Pump
F. Electrical Motor Switch
G. Electrical Motor Assembly
H. Supporting Feet
I. Main Bo d y
J. Splitting Wedge