ASSEMBLY
–
(TWO PERSONS REQUIRED)
1.
Ensure The Handy THLS-6 log splitter is disconnected from the electrical source.
2.
Remove the front support leg and the wheels from the THLS-6 log splitter. The wheels are
secured by a circlip/split pin behind the wheel cap.
3.
Place the wheels on the stand axle bar, secure with the removed circlip/split pin. Attach the
centre horizontal bar to the wheel axle & front support leg, loosely tighten the securing bolts.
4.
Attach the rear support legs to your log splitter, with the wheel axles of the log splitter being
placed through the top fixing holes of the rear support legs.
With the help of a second
person,
lift the log splitter onto the stand, by positioning the front of the log splitter into the
front support leg cup. Now place the rear support legs into the stand axle bar. Now tighten
the fixing bolts to secure the log splitter on to the stand.
