2.
Align the mounting hole of the log tray A to the hole in the log splitter body and refit the M6x12 Allen Key
screw with spring washer 6, using a 5mm Allen Key.
3.
The right side of Log Tray A, is secured using Allen Key screw M16×12 and locknut M6 on to the rear
guiding plate and secure with 5mm Allen Key and 10mm Spanner.
4.
Loosen the cup head bolt and nut using 12mm Spanner on left side of the front leg and insert the open
end of support strut A onto the bolt and then tighten the nut.
Support Strut A
Log Tray A
Front Leg Cup Head
Bolt
