ADDED INFORMATION SHEET - THLS-6G & 4G LOG GUARD
Guard Bottom Plate
1.
Mount the guard bottom plate to the rear guiding plate and secure with two M6×12 screws and locknuts
with a 5mm Allen Key and 10mm Spanner. Ensure the triangular longside sits against the cut away of the
rear guiding plate.
2.
Loosen the socket head cap screw and big washer on the wheel bracket with a 5mm Allen Key, insert the
open end of support strut B between the big washer and wheel bracket and tighten screw with 5mm Allen
Key.
Triangular Longside
Rear Guiding Plate
Socket Head Cap Screw
Support Strut B
Open End of
Support Strut
