ASSEMBLY
Remove the hardware pack and all loose parts from the carton and verify that all the components
are included. If you are missing any parts, please contact us on 01793 333212 for assistance.
STEP 1 - Attach the Bottom Panels and Support Tubes
•
Lay the left and right bottom panels, face down
•
Attach the baseboard support tubes to the panels using four sets of M8x35 screws & M8 nylon
lock nut.
•
Hand tighten the nuts.
STEP 2 - Attach the Draw Bar Support
•
Attach the V-Shaped draw bar support to the bottom panels using two M8x20 screws & M8 lock
nuts
•
Hand tighten the nuts
