•
Place the four Wheel/Tyre assemblies over each of the front and rear axles.
•
Place the 4x
Φ16 Wheel Washer
s onto the axle.
•
Secure with 4x
Φ3mm Wheel Pin
. Push the Wheel Pin through the hole within the axle and then separate
the two legs to ensure they do not fall out.
•
Rotate the built trolley onto it’s wheels.
(WE RECOMMEND A TWO PERSON LIFT)
•
Secure the Handle to the T-
Frame with M14x70 Bolt, Φ14 Washer and M14 Nut.
Fully tighten through the
nylock material of the nut.
•
Secure the 4x Levers to the Front and Rear Panels with the washer and nut.
Do not tighten
.
Summary of Contents for THDLGT
Page 18: ...NOTES ...
Page 19: ......
