WARNING:
When connecting the tilling head and lower handle using the two self-tapping screws supplied, make sure
the screws are securely tightened. Screw heads should be recessed below the surface.
DO NOT START THE UNIT UNTIL TILLING HEAD AND LOWER HANDLE ARE SECURELY CONNECTED.
Once the tilling head and lower handle are securely connected, do not remove the self-tapping screws or
attempt to disassemble for any purpose. The self-tapping screws will lose their effectiveness of securing the
assembly if removed and re-installed.
BATTERY INSTALLATION & REMOVAL
Hold the tool and the battery carriage firmly when installing or removing battery cartridge.
Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in
damage to the tool and battery cartridge and a personal injury.
TO REMOVE
Depress release button (A) on the back of battery cartridge (B) to release the battery. Pull the battery cartridge
out of tool.
TO INSTALL
Align the battery with the cavity in the handle. Insert the battery into the handle until the battery release
button locks into place. You should h
ear a “click” once the battery is installed.
Note: The battery can only be
installed one way.
Summary of Contents for TH18VT
Page 23: ......
