GENERAL SAFETY INSTRUCTIONS
Read and understand the owner’s manual and labels affixed to the
product. Learn its application
and limitations as well as the specific potential hazards. Retain these instructions for future
reference. The operator is responsible for following the warnings & instructions in this manual and
on the product
.
Read & understand the
operator’s manual before
using the machine. Failure
to follow instructions could
result in death or serious
injury.
DANGER
Pinch points can cause personal
injury.
Wear gloves to protect
your hands during
assembly.
Check your machine before using.
Keep guards in place and in working
order. Frequently check to see that
foreign objects are removed before
using. Replace damaged, missing or
failed parts before using it.
Be careful when using on
slopes. Do not operate on
inclines greater than 15°.
It is advised to manually or
with your tractor, pull up or
down the incline.
Safety alert symbol. Used to alert
you to potential personal injury
hazards. Obey all safety messages
that follow this symbol to avoid
possible injury.
DANGER
Indicates an imminently
hazardous situation which,
if not avoided, will result in
serious injury.
WARNING
Indicates a potentially hazardous
situation which, if not avoided,
could result in serious injury.
CAUTION
Indicates a potentially
hazardous situation which,
if not avoided, may result in
minor or moderate injury.
CAUTION
Used without the safety alert
symbol, indicates a potentially
hazardous situation which, if not
avoided, may result in property
damage.
STAY ALERT
Do not operate the machine while under the influence of drugs, alcohol, or any medication that
could affect your ability to use it properly. Do not use this machine when you are tired or distracted
from the job at hand. Be aware of what you are doing at all times. Use common sense.
AVOID DANGEROUS CONDITIONS
Make sure there is adequate surrounding workspace. Cluttered areas invite injuries.
Keep your work area clean with sufficient light. Keep the area around the machine clear of
obstructions, grease, oil, rubbish & other debris which could cause persons to fall onto moving parts.
INSPECT YOUR MACHINE
Check all bolts, nuts & screws for tightness before each use, especially those securing guards & drive
mechanisms. Vibration during use, may cause these to loosen. Replace damaged, missing or failed
parts before using. Warning labels carry important information. Replace any missing or damaged
warning labels.
CRUSH AND CUT HAZARDS
Always keep your hands and feet clear from moving parts while operating the equipment.
Always keep the work area clean and clear when operating.