The Handy 193833001, Instruction Manual

Page: 7 / 16

23/03/2017
CONSTRUCTION
You will require 2x 10mm and 2x 14mm spanners to assemble this product (Not Included)
The Handy Saw Horse is supplied with Nylock Nuts. They are designed with a nylon collar, with a
slightly smaller diameter to the bolt. The insert deforms elastically over the threads of the screw,
but threads are not cut into the nylon. The nylon insert, locks the nut by applying a compressive
force against the bolt. Please ensure that you completely tighten the construction.
Firstly, pair the six legs using M8x16 bolt, two
M8 washers and a M8 lock nut into the round
hole, just below the serrated edges. The
serrated edges should be facing one another.
Then fit a M6x12 Bolt with two M6 washers
and a M6 lock nut into the curved slot on the
paired leg assemblies.
When secured, ensure that the legs can be opened and closed. For assembly, keep closed.
You have four cross struts, 2x 80cm and 2x
84cm in length. The 80cm cross struts run
across the bottom of the horse, whilst the
two 84cm cross struts will run diagonal.