7
Connecting the Wetter Box to your Amps FX Loop
1.
Connect the
SEND
from the amps FX loop to the
IN
of the Wetter Box
2.
Connect the
OUTPUT
of the Wetter Box to the
FX RETURN
of your amp
For maximum functionality from your amps FX loop, try a delay pedal set to
100% wet effect (Kill Dry) and mix that on top of your pre-amp tone.
Using the Wetter Box in Stereo
The Wetter Box can be used with stereo pedals. The entire signal path of
the Wetter Box is stereo including the gain controls. The stereo capabilities
are accessed using TRS to Dual Mono connectors which enable you to blend
your stereo signals in parallel.
MONO Send/Stereo Return
You can switch the Wetter Box to operate in either Mono or Stereo. If in
Mono, insert a standard patch cable and switch to Mono. When in Stereo
simply insert a TRS to Mono Connector and switch to Stereo.
