© The
GigRig Ltd,
2016.
Registration number # 5731704…. VAT registration # 884 5688 58.
All rights reserved. Design rights claimed. Moral rights asserted.
In Use:
The GigRig Three2One guitar selector features three inputs. You can now switch easily between 1-3
guitars or even line level inputs such as a keyboards or drum machines!
After plugging your instruments in simply use the footswitch to cycle through them. Need more
inputs? You can link 2 units together for up to 6 guitars.
If you need to balance levels between differing instruments, then simply select the adjacent
preamp button. This engages the pre-amp gain controls next to the LED displays. You can then
easily cut or boost the individual inputs.
About the GigRig Custom designed pre-amp:
It’s awesome!
We
’ve
doubled the voltage internally from 9v to 18v, so the Three2One has massive
input headroom and can easily cope with a huge range of differing guitar pickup types (including
active pickups), but remains ultra clean and quiet.
However, without the preamp selected, the guitar is true bypass; your guitar signal passes straight
through. With the preamp selected (button pressed in) you can use the corresponding gain control
to set your guitar’
s level, cut/ boost or simply set it to unity gain that will also give you a buffer,
which helps keep your signal clean and strong over long cable runs.
About the Optokick Footswitch
The Three2one uses the exclusively TheGigRig designed Optokick
footswitch. It’s milled from
incredibly tough marine quality stainless steel. The Optokick footswitch uses light instead of
potentially un-reliable mechanical switching. We firmly
believe it’s the most r
eliable footswitch in
the world!
In Use:
Using inputs one and two first; the Three2one will ignore the third input and will only switch
between the two guitars in inputs in use. (
Blue
and
Green
). When input three is also used, then
Three2one will then automatically sense a third input being connected and will cycle through all 3
inputs.
Option: More than three Guitars? Use two Three2one units!
Connect two units together with a ¼” TRS (stereo) cable to connect up to 6 guitars. Pressing the
footswitch on one unit will mute the other unit. You can use either
units’
output to connect to your
pedalboard or amplifier.
Special Functions:
Tip…
It’s best
to disconnect the output before re-configuring your Three2one, or just turn down
your amplifier if you prefer. To enter the
Special Functions
menu simply hold down the footswitch
when applying power to the Three2one. You will then see some of the lights are on and others are
off, this tells you the current configuration. To change the configuration, press the footswitch once.
The
Red
light will flash five times. If you press the footswitch again whilst the light is flashing the
Red
function will be toggled, you will see that the light will have changed its state.
