Double Bowl Workstations / Work&WashStations
™
2
IW
S 7D / IW
W 7D
IW
S 6D / IW
W 6D
IW
S 5D / IW
W 5D
IW
S 4D / IW
W 4D / IW
A 4D
SUGGESTED GALLEY TAP AND TAP ACCESSORIES PLACEMENT GUIDE
(Recommendations are based on installing 3 or more Tap accessories)
Galley Tap 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)
Galley Soap Dispenser 1" min hole diameter
Galley Deck Switch 1 3/8" min hole diameter or Galley Automatic Strainer Basket knob 1" min and 1 3/8" max hole diameter
Galley Hot and Cold Water Dispenser 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)
Center hole diameters 2" behind cutout
Note: Galley Hot and Cold Water dispenser requires a minimum 8" clearance center to center if installed to the right of the Galley Tap
Side view applies to all
Double Bowl Workstations
and Work&WashStations
18” Finished cutout
1/2” Reveal front
and back
10”
16”
4
3
1
5
2
Note: For installation where the drain is on the left side, simply reverse placements of Tap and Tap Accessories
