INSTALLATION INSTRUCTIONS
STEP 1
STEP 2
Plan Vanity Position
Decide on the position and height
of the vanity. The recommended
sink height is 34” from the finished
floor to the top of the cabinet.
Pull out the drawer to its full extension by gentely gripping
the release levers on both sides and pull the drawer off the
runners at the front.
STEP 3
STEP 4
24”
30”
36”
To properly support the weight of the vanity and countersink, secure to stud
framing or 2x6 bracing behind the finished wall.
When installing 2x6 bracing, front-notch the studs to ensure the bracing sits
flush against the studs. The bracing should span the length of the vanity.
Consider for routing supply and drain piping for your desired sink.
IMPORTANT:
To ensure proper support and alignment the finished wall
must be straight and plumb.
Complete and finish the wall decoration or tiling before vanity installation.
Profile
17 11/16”
23 11/16”
29 11/16”
31”
31”
31”
27 7/8”
27 7/8”
27 7/8”
24 1/2”
34”
34”
34”
24 1/2”
24 1/2”
*
*
*
Finished Floor
Profile
19”
34”
Profile
32”
Bracket and Plumbing Placement
*space between brackets
