Connecting / Disconnecting hose to bag.
When connecting or disconnecting hose assembly to bag pull
down on bag quick disconnect fitting sleeve on outside. This
opens the connector up so the hose connector will fit in.
(
See Figure 3.)
Push hose connector into the quick disconnect fitting.
(
See Figure 4.)
Hose connector is connected correctly when outside sleeve on the
quick disconnect fitting is up as shown. (
See Figure 5.)
Extra Liner
Extra liner is stored in the front pouch of the bag.
(See Figure 6.)
Replacing Liner
(Will need a 7/8” open end or
adjustable wrench.)
Figure 3.
Figure 4.
Figure 5.
Figure 6.
NOTE:
1.) REMOVE CAP FROM OLD LINER. USE WRENCH
TO REMOVE QUICK DISCONNECT FITTING
FROM OLD CAP.
2.) REMOVE CAP FOR NEW LINER.
IMPORTANT:
DO NOT INSTALL QUICK DISCONNECT FITTING
INTO CAP WHILE CAP IS INSTALLED IN LINER.
3.) APPLY 2 WRAPS OF TEFLON TAPE TO
THREAD ON QUICK DISCONNECT FITTING
(#176050).
4.) INSTALL QUICK DISCONNECT FITTING
INTO NEW CAP USING WRENCH,
TIGHTEN SECURELY.
5.) REINSTALL CAP INTO NEW LINER, TIGHTEN
SECURELY BY HAND.
6.) INSTALL NEW LINER INTO CANVAS BAG.
*WRAP TEFLON TAPE
AROUND THREAD IN
CLOCKWISE FASHION.
