Section 7 - Installation and Use
1
2 -
Remove the UAS lower connector
from the UAS lower connector
storage compartment.
3-
Attach the right and left UAS lower
connectors to the connector points.
Press down on the base with your
knee and pull up on the webbing loop
until the webbing is taut.
4-
CHECK
level indicator to ensure the
ball is in the green area.
Pull out on
the yellow release knob and slide
the angle foot to raise the base or
to lower the base angle
.
CHECK
base for movement at
the belt path. Base should not move
more than 1 inch in any direction.
5
-
. Consult your automobile’s owners
manual or manufacturer for location
and availability of UAS lower
connector attachment points.
7.3 UAS Lower Connector
System
LATCH
Anchor
Locations
If base moves, repeat steps until
all safety steps are met.
16
