1.
Set the base unit on a flat surface.
2.
Set the large turntable on the base unit
so that the stem of the turntable sits inside
the hole at the center of the base.
The turntable should spin freely.
3.
Insert the notched end of the adjustable
spindle through the hole in the center of
the large turntable. Press the spindle firmly
into the center of the base unit.
4.
Set the small turntable on the spindle so
that the notched stem of the turntable fits
snugly into the open end of the spindle.
The small turntable should spin freely.
NOTE: The spindle adjusts to three
convenient heights. To raise the spindle,
hold it in one hand and use the other
hand to push gently upward on the
small turntable. To shorten the height,
apply slight downward pressure. It is
recommended that the drying rack be
empty before adjusting spindle height.
5.
Insert pegs into holes on the turntables.
Holes are uniform in size and will fit both
short and long pegs.
6.
Insert the drip tray under the lip of the
base unit to catch water as it drains. Or
remove the drip tray and position the base
unit so that water drains from the lip
directly into your sink. When using the
second option, the drip tray can be stored
in slots located on the base unit, where it
serves as a handy storage drawer.
2
The Spinning Drying Rack is fully adjustable and can be quickly and easily modified as often
as your needs require. Base unit provides storage for pieces that are not in use.
TO ASSEMBLE
