The Don Classics NV73EQ, Assembly Manual

Page: 12 / 20

5. Wire to NV73 micpre

Remove the shielded cable on the bottom of the NV73 mic pre PCB.

Remove the CW wire on the output gain potentiometer on the NV73.

Cut and strip a shielded cable as shown for P & 0V.

Cut and strip 2 wires for K & 24V.
Place the BTM PCB roughly in place as a reference for how long the wires should be.

Solder wires as shown.

The K & 24V wires can poke up through the extra hole in the BTM PCB.
The next page shows the connections...
© the DON classics 2015 page 2 of 20