TESTING RADIO FREQUENCY (RF) REMOTE CONTROLS
Switch the unit ON and wait for the self check to finish so that a 0 is displayed. Place the remote control near
the front of the unit, as close to the logo and ON button as possible and press the remote control button. The
frequency will be displayed. Repeat the procedure a few times to ensure an accurate reading is made.
IMPORTANT NOTE : If you receive erratic or incorrect frequency readings, ensure the device is away
from Mobile Phones, Wireless internet, Bluetooth devices etc. These devices work on similar
frequencies to some of the remote controls and therefore it is important that they are not in close
proximity while the test is performed.
There are a number of frequencies used across the world, and depending on the country and region will
depend on the frequency used.
Below is a table of frequencies used, and the expected readings that you may receive using the TDB001 in
terms of accuracy. Some of these are not used on current models, but have been used in the past on older
models.
FREQUENCY
TERRITORY/COUNTRY
TEST RANGE
224 MHz
FAR EAST & AUSTRALASIA
220 - 230 MHz
303 MHz
USA, CANADA & S.AMERICA
295 - 310 MHz
315 MHz
USA, CANADA, JAPAN & S.AMERICA
310 - 320 MHz
415 MHz
EUROPE
410 - 420 MHz
433 MHz
EUROPE & ASIA
425 - 440 MHz
968 MHz
WORLDWIDE
950 - 980 MHz
TDB001
!
PAGE 7
VERSION 1.0
!
01/01/2013
