Assemble a double-sided solution
Tools needed:
plastic mallet, ladder or step stool for 83
"
tall solutions
TIP
——————————————
■
It’s best to have two people to assemble an 83" tall solution.
■
Before you begin, make sure the levelers on each Foot are
screwed all the way into the Foot.
■
Please note that all double-sided solutions require Feet on
both sides of the solution.
Step 1
Insert Upright into Feet
TIP
——————————————
■
If assembling on tile or wood, you must protect the floor.
— The two holes on the side of the Upright should be at the bottom
of your finished solution.
— Line up the Upright with the slot in the Foot.
(Figure A)
To secure, you can tap the Upright and Foot together on the
ground or use the mallet. Make sure the Upright is all the way
into the slot on the Foot.
(Figure B)
— Repeat this process with another Foot on the opposite side of
the Upright. Set aside.
(Figure C)
— Repeat the above three steps with another Upright and two Feet.
Step 2
Install Crossbraces
— Insert one Crossbrace into the top hole on the side of the
Upright; insert the other Crossbrace into the bottom hole. The
bent tips on the unattached end of each Crossbrace should face
the same direction.
(Figure D)
— Position the second assembled Upright/Feet set so that it is
perpendicular to the first set.
(Figure E)
— Attach the opposite ends of Crossbraces diagonally into the
holes of the second Upright.
(Figure E)
— Pull the second Upright/Feet set back to the forward position
(so that the Feet on both sides of the solution are parallel.) This
will lock the Crossbraces into place.
(Figure F)
Continued on the next page.
3
view from back
A
C
D
E
B
F
