For your safety,once wall is fully assembled,always secure to wall Wall Strap F.
7.
Align and connect cabinets with Connector Bolt G and Connector Cap H.See
Diagram 7.
8.
To connect ladder rails,loosen retaining screw found on each rail end,
insert ladder rail coupler D about 1" on one side,and tignten.Align cabinets
and push together,aligning ladder rail in the process.Tighten opposite
retaining screw to secure ladder rail coupler.See Diagram 8.
9
.
Connect female and male airjack light cable to properly ensure
power to all LED lights. See Diagram 9.
Connect light Kit LTKIT#499
sold seoarately
to right most cabinet
by connecting remaining air jack cable to Control Box and securing
Touch Cable to touch post located in front right corner of cabinet top.
LTKIT#499 can support up to six lights, you will need more LTKIT#499
if you have more lights.
See assembly instruction sheet provided with LTKIT#499 for more details.
Position Bookcase Bridge on top of Backpanel Midsection.Connect Lighting assembly,
ladder rail coupler,and fasten to bookcase as shown below.
Preinstallation notes
When assembling items such as the bookcase bridge,it is
extremely recommened using 2 people minimum for proper
support and prevention of injury.
Assembly Instruction
Item NO:WAS#405/412
4/6
Diagram 9
Diagram 7
Diagram 8
G
H
A
A
D
Q
B
