MEDIA ONE
www.thomann.de
11
Power LED
13
This LED shows that the unit is turned on.
Master level control
14
This control is used to adjust the overall volume of the main mix output and of the signal output to the pre-am
-
plifier.
Master level LED
15
The 4-segment LED meter is used to indicate the master output level. When the red LED lights, that means
that the MIX OUT r10 dB, or the start of the compressor of the built-in AMP.
FX RETURNS
16
Use the ¼-inch stereo jack socket to return the sound of an effect unit to the main mix. You can also use it as
an extra auxiliary stereo input.
FX RET control
17
This control is used to control the volume of the processed signal sent to the main mix bus in a range from –
∞
to +10 dB.
FX SEND
18
This ¼-inch jack socket is used to send out the signals from the AUX bus.
CD/TAPE IN
19
Use these input RCA jack sockets to connect a CD player, tape, DAT, iPOD or any other line-level source.
