1. Spout/Handspray Installation
Thread the nut and washer to the bottom of the shank.
Insert the shank from the bottom of the sink and slide on the
gasket.
Thread the escutcheon onto the shank so that 3/8
″
(1 cm) of the
shank thread is showing over the top of the escutcheon.
Thread the spout fully onto the shank until it stops.
Thread the escutcheon up until it stops.
Tighten the nut and washer to secure the shank to the sink.
Apply a bead of plumbers putty or other sealant to the underside
of the spray holder according to the manufacturer’s instructions.
Insert the spray holder through the sink hole.
Securely hand tighten the nut from under the sink.
Remove any excess putty or sealant.
Insert the handspray hose through the spray holder.
Attach the hose to the shank tee using thread sealant.
Shank
Shank
Shank
Tee
Apply
plumbers
putty.
Handspray
Handspray
Holder
Spout
Spout
Escutcheon
Escutcheon
3/8" (1 cm)
Gasket
Sink
Washer
Nut
Handspray
Hose
Kohler Co.
3
111056-2-BB
