4. Install the Lift Knob
IMPORTANT!
Do not bend the lift rod during spout installation.
Position the spout over the lift rod, and slide it down onto the
diverter valve.
Tighten the setscrew.
Insert the plug button into the setscrew hole.
Verify that the setscrew does not protrude beyond the inside wall
of the spout. Back the setscrew out if needed.
Use needle-nose pliers to lift and hold the stem up for knob
installation.
Install the lift knob onto the lift rod.
Spout Assembly
Setscrew
Plug Button
Lift Knob
Kohler Co.
7
1330094-2-B