User’s Manual & Safety Instructions
- Positioned so that any accumulation of weather debris/pooling of water
is eliminated.
- Not installed directly beside or near wallpaper, laminate, veneer or any
surface that has not been fire rated (the heat will impact the material ).
- Installed into a setting that has a straight back – the incorporation of
angled backs alters the aerodynamics of the flame environment and could
lead to an unstable flame behaviour.
Please note that:
- Any furniture items or fittings directly above or beside the Burner
installation must be deemed suitable for heat tolerances by their
manufacturer e.g. electronic items including screens and entertainment
equipment, wallpaper, laminates, veneers, glues and reconstituted
materials.
- A heat reflective panel made of non-combustible material (ideally
stainless steel) must be installed as the surround and top of the fireplace
setting to assist in heat distribution. The Bio Flame is not liable for any
injuries or damages sustained through the use of panels not manufactured
by The Bio Flame
- Glass or mirrored surfaces near the Burner installation must be
toughened.
- If inserting an Burner into an existing masonry fireplace, adjust the
damper within the existing fireplace in order to keep the heat from
escaping through the flue.
- In some countries, national or rural restrictions may apply and/ or
approvals from building authorities may be required. Please ensure you
contact the appropriate parties before installing your Bio Flame.
WARNING! FIRE HAZARD. DO NOT PACK REQUIRED AIR
SPACES, (the AREA between the firebox and the spacer ) WITH
INSULATION OR OTHER MATERIALS. THE AIR SPACES ARE
NEEDED FOR PROPER VENTILATION OF THE BURNER.
A fire extinguisher is strongly recommended.
Direction for Use
