TECHNISCHER HANDEL BECKEL
LABORGERÄTE-SPEZIALGERÄTE-VERSCHLEISSTEILE-ERSATZTEILE
2
1.
Safety hints
Our small mixers are built using state-of-the-art technology and are quite safe
with proper use.
The manufacturers refuse liability for damage resulting from unauthorised
alterations.
The appliance may only be used for the correct purpose and by properly trained personel.
The personel involved in the installation, maintenance and service of the appliance should
have studied the official operational instructions.
Disconnect from mains before:
Moving or transportation ,
Cleaning, maintenance, and repairs
Opening of the engine casing
Caution!
Keep hands and objects away from the rotating drum during mixing.
Before you switch on the mixer, ensure that the bucket handles are down.
The operational safety of the mixer is only guaranteed, when original spare parts
(special pails, etc), are used.
The mixing tools of Pailmixer are set to the plastic bucket. When using the stainless steel bucket must
be adjusted for optimum mixing results may restart.
Safety features
Transportation lock:
The transportation lock is positioned above the safety switch
and should be secured before transportation.
(reinforcement of the holding clamp of the mixer)
Safety switch:
In the event of a power failure, the safety switch is activated.
When power is restored, use safety switch to start.
(Automatic start is not possible).
If defects or damage affecting the egg mixer jeopardise operational safety, the unit
must be
taken out of operation immediately and not be used again until all safety
hazards have been
eliminated.
Use of a RESIDUAL-CURRENT-OPERATED CIRCUIT BREAKER with 30 mA
rated tripping current is recommended.
Repairs to electrical parts of the machine must be carried out by the manufacturer or by
a company nominated by the manufacturer.