25
Alert Message Filter
: Enables or disables sending error messages via SMTP or SNMP.
Set SNMP Configuration
: This Server runs an SNMP (Simple Network Management Protocol)
daemon that supports SNMP v1 and v2c protocols. Users can use SNMP client software such as HP
OpenView to manage the Server. The Server supports all relevant parts of MIB-II and a private MIB.
You can set these MIB variables from the Server’s web pages or by using the NetPS Control Center.
You can set community and some parameters for SNMP server.
SNMP REQUIRES Printer
firmware 3.014 or higher
The SNMP Configuration includes:
Authentic Community
: Sets the Community name of the SNMP server.
Trap Community
: Sets the Trap Community name for the SNMP server to send trap packets.
Trap Address (IP)
: Enter an IP address to send the Trap packet.
SysContact
: Enter the name of system contact.
SysName
: Enter the name of system.
SysLocation
: Enter the location of system.
EnableAuthenTrap
: Enter 1 to enable or 2 to disable sending Trap packets.
