U S E R ’ S G U I D E
2
IMPORTANT SAFEGUARDS
CONTINUED
25. Use only as directed in this manual. Use only manufacturer's recommended accessories.
Use of attachments not provided or sold by the manufacturer or authorized resellers may cause fire,
electric shock or injury.
26. The liquid or steam should not be directed towards equipment containing electrical components, such as
the interior of ovens.
27. Do not expose to rain.
28. Do not handle steam cleaner with wet hands.
29. Do not use the H20 Mop
®
Ultra
™
in enclosed spaces that are filled with flammable, explosive or toxic
vapor such as paint thinner, oil-based paint or certain moth proofing substances.
30. Do not use on leather, wax polished furniture or floors, unsealed hardwood or unsealed parquet floors,
synthetic fabrics, velvet or other delicate steam-sensitive materials.
31. Do not use for space heating purposes.
32. Unplug appliance from outlet before servicing
33. Do not touch hot surface. Use handles or knobs.
34. Do not let cord hang over edge of table or counter, or touch hot surfaces.
35. Do not place on or near a hot gas of electric burner, or in a heated oven.
36. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to
“off”, then remove plug from wall outlet.
37.
Do not use appliance for other than intended use.
38.
Care should be taken when using appliance due to emission of steam.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
Commercial use of this unit voids the manufacturer’s warranty.
GROUNDING INSTRUCTIONS
WARNING:
NOTE: These instructions apply to 120V unit only.
This appliance must be connected to a grounded wiring system. If it should malfunction or
break down, grounding provides a safe path of least resistance for electrical current,
reducing the risk of electrical shock. The cord for this appliance has an equipment-
grounding conductor and a grounding plug. It must only be plugged into an outlet that
is properly installed and grounded in accordance with all local codes and ordinances.
This appliance has a grounding attachment plug that looks like the plug in the drawing provided.
Improper connection of the equipment-grounding conductor can result in risk of electrical shock. Check with a
qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE
PLUG.
If it will not fit the outlet, have a proper outlet installed by a qualified electrician. No plug adapter should be used
with this appliance.
HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
U S E R ’ S G U I D E
15
By using cleaning solution
1. Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2. Secure and position the mop head to ensure steam released is aimed away from the floor or surrounding
objects and surfaces. Plug the unit in and wait for the green light.
Turn the unit ON by pressing the ON/OFF switch and let the Mop produce steam until the vinegar/water
solution is used up.
3. Repeat the above procedure as many times as necessary until a normal steam flow rate is achieved.
4. Remove the water tank and rinse out.
5. Fill the water tank with fresh water, attach to the unit and release steam thru the system until the water
tank is empty.
CAUTION:
Do not leave the steamer unattended during the limescale removal process and/or while in use.
Note:
After each limescale removal it is required to perform a test cleaning on a suitable isolated area to ensure
that there is no debris left in the system.
• Cleaning blocked steamer accessories.
Due to the high mineral content of water in some areas, you may notice that less steam comes out from
certain accessories. This may be caused by calcium buildup inside the tips of the nozzles.
How to clean Calcium buildup:
We recommend using the WD-40 lubricant. Spray a small burst or two of the lubricant inside the ends of each
affected accessory. After spraying inside the component, fill your steamer with water according to the directions
and run a continuous jet of steam through the affected accessory for several minutes to remove the deposit. Once
the steam pathway is clear, aim the steamer at a neutral surface or a cleaning cloth to make sure there is no
debris being emitted.
WE RECOMMEND DOING THIS PROCEDURE IN A PROTECTED AND VENTILATED AREA.
WARNING – DANGER OF SCALDING
