Make a goal area with some
other building blocks or
some cardboard pieces
(not included in this kit) as
shown here.
Use the remote
controller to move
blocks into a des-
ignated area with
the blades of the
bulldozer.
37
Model 9 Three-Blade Bulldozer
|
REMOTE-CONTROL MACHINES
Size (cm) : 37 (L) x 43 (W) x 19 (H)
1
2
How to Operate
：
1. Turn on the switch on
the remote control-
ler.
2. Touch the touch
pad
3
and
4
(or
1
and
6
) on the
remote controller
together at the same
time so that the
three-blade bulldozer will keep turning around.
3. Touch the touch pad
2
to lift up the three blades and the touch pad
5
to release them down.
Don't lift up the blades higher than 90 degrees.
Challenge
：
●
The gears shown here must be kept 1 mm away
from the curved elbow rod or frame so that they
can turn smoothly.
●
Use the end of the part separator tool marked with
"A" to pry up the anchor pin.
●
If the motor doesn’t work, check to make sure the wire connector of the motor
and the output of the receiver/battery holder are well connected, or that the
batteries are not dead.
3
1
+
6
4
+
1
3
4
6
2
5
6
4
3
1
Tips for Assembly
：
555004 Booklet Final 2015.indd 37
9/21/15 10:17 AM
