Thales VesseLINK Certus 200, User Manual

Page: 92 / 131

4-56
User Manual PN 84469 Rev L
Table 4-16 Settings

Location Services
Section Value
Location Services
Enable Disabled / Enabled ( Disabled is the default setting)
Server Enter the name of server.
Port Enter the port number of the service from server.
Report Frequency Default setting is 120 seconds. When EMERGENCY is activated,
frequency will be every 5 seconds.
System
The System menu item allows for backing up a configuration and restoring it, monitoring of
system data usage (estimate for informational purposes only), performing a system reboot,
restoring factory default settings, and provides information on the system firmware versions.
Backup
NOTE
This is an ADMIN function only. If the user sees this icon,
login as the ADMIN to continue. Otherwise this is a view only
screen.
Refer to Figure 4-. When performing a firmware update, replacing a BDU, cloning information
for multiple systems or just as good practice periodically, the system configuration file should be
backed up to prevent loss of custom configuration settings in the event that an issue should occur.
Backup can occur on devices that have a file system where the configuration file can be
downloaded and saved (personal computer, laptop, Android). Backing up the current
configuration is a simple process detailed below.
Figure 4-43 System

Backup Screen