Thales VesseLINK Certus 200, User Manual

Page: 39 / 131

4-3
User Manual PN 84469 Rev L

Dashboard – Provides information relating to any current Alerts and Services.

Status – Provides status of each of the items listed below. These informational screens
cannot be edited.
o
Current Devices
o
GPS
o
LAN
o
Phones
o
Services
o
SIM

Alerts – Provides a listing of system alerts

Calls – Provides current calls, call history, and call management.

Emergency – Allows the operator to send an emergency message.

Settings – Enables the Administrator to configure the system.

System – Enables the Administrator to perform system backups, view data usage, reset the
system, and view/update system firmware.

Diagnostics – Enables the administrator to run a self-test, check system status, and view
the diagnostics log.

About – Provides system level information for the antenna, modem, power supply,
system, VoIP Module, and Wi-Fi.

Help – Provides a link to the VesseLINK
™
User Documentation (Users Guide, Installation
Instructions, and Quick Start Guide (QSG)).
NOTE
Depending on the web browser being used, you may see a
message that says NOT SECURE. If you type https://, this
message will go away. This message does not affect operation
of the management portal.
Menu Components
The system Status Icons at the top of the screen, highlighted in Figure 4-1, provide system level
information that is useful to the user. When selecting these icons by clicking or pressing on them,
they provide addition screen(s) of information and a quick way to make certain configuration
setting changes by the administrator.