Seite 5 / 8
4) Installing
Tonarm
For assembling the tonearm, please follow the manual of the tonearm itself carefully.
Depending on the configuration of your turntable and tonearm, the base for the tonearm
might be configured differently.
Set the level
Place the unit on an even and horizontal base. The level of the TTT-S can be set by turning the
spikes (1) in and out of the main chassis. Please use a level gauge to level the unit exactly
horizontal. Please make sure at least one of the spikes is tightened fully.
The spikes are guided not only by a fine pitch thread but by a cylindrical fitting as well.
Therefore, no locking of the spike is needed. The maximum range of adjustment is 4mm.
Interconnect
Connect the external charger with the socket on the rear side (2) and the power plant.
If the device cannot be grounded by the DIN-connection of the phono-cable, please use the
GND terminal (3) to connect the ground cable to the phono-stage.
1
2
3
