Chapter 1: SafeNet ProtectServer PCIe HSM Hardware Installation
7.
Install the SafeNet application programming interface (API) or the supplied net server software. See
"Completing Installation" on page 16
.
Adapter Features
The SafeNet ProtectServer PCIe HSM is a standard PCIe device that fits into any motherboard PCIe slot of
formats x4, x8, or x16.
The Card Faceplate
The card faceplate has two ports, as shown in
"The card faceplate" on page 15
Figure 1: The card faceplate
The MSDM Connector
The micro-D subminiature (MDSM) connector is not used.
The USB Port
The USB port connects a serial device, such as a smart card reader, to the card with the included USB-to-serial
adapter.
The Rear Face
The battery and a series of jumper headers are located on the rear face of the card, as illustrated in
.
Figure 2: Rear face of the card
The Battery
The battery maintains the internal flash memory. The battery must remain connected for transport mode.
SafeNet ProtectToolkit 5.4 Installation Guide
007-013682-002 Rev. A 08 January 2020 Copyright 2009-2020 Gemalto
13
