Thales MissionLink, Installation Manual

Page: 11 / 51

1-1
Installation Guide 84465 Rev. B
INTRODUCTION
INTRODUCTION
This installation guide provides instructions for proper installation and initial start-up of the
MissionLINK
™
system and a basic system overview. It contains critical information and safety
guidelines for those who install the system and perform initial system activation and test.
After initial start-up, for more detailed operational procedures, refer to the MissionLINK
™
User
Manual (Document # 84468) located on the Thales website and is also accessible through the
terminal’s Management Portal.
This MissionLINK
™
system contains the Terminal Unit, the Broadband Active Antenna (BAA)
with magnetic mounts, a 20 ft DC power cord, a Wi-Fi antenna, mounting hardware, and a 10 ft
RF cable. Additional accessories are available. (Refer to Table 1-2 and Table 1-3 for a complete
list of available items).
EQUIPMENT OVERVIEW
Figure 1-1 MissionLINK
™
System with Connected Hardware