Seite 3 / 6
2) Installing the tonearm
If the EASY has been delivered together with our turntable, the base-ring has been installed
on the turntable already and you can skip step 1 to 4.
Make sure the turntable and the tonearm-base are manufactured according to our specifica-
tions. Please ask your dealer for any further information. Remember that a proper installation
of the tonearm is absolutely necessary for the perfect tracking of the EASY.
1)
Install the base-ring on the tonearm-base by using the three fitting base-screws.
Please tighten the screws gently so that the base-ring stays in position but still can
be moved manually.
2)
Carefully set the tonearm-shaft inside the base-ring and use the locking-screw to fix
the tonearm ca. 20mm above the base-ring surface.
3)
Set the positioning-device on the spindle of the turntable’s platter. Move the base-
ring until the shaft fully fits into the profile of the positioning device.
4)
Turn the positioning device away from the tonearm. Make sure not to move the
base-plate anymore. Fully tighten the three mounting screws now.
5)
Please release the locking-screw and set the tonearm down until the VTA-screw is fit-
ted into the intended hole in the base.
10
Tonearm-base
Base-ring
Screws-Base
1
2
Shaft
Locking-screw (Hex 2,5)
Positioning-device
3
VTA-Screw
Spindle
